01322 381380 / 387220
Open Search
Leave us your number and we will call you back

Commercial Coffee Machine Problems: 7 Common Issues and What Causes Them

28th October 2026

Commercial Coffee Machine Problems: 7 Common Issues and What Causes Them

When your coffee machine plays up during the morning rush, the queue does not wait. We have been supplying and servicing commercial coffee equipment since 1979, and our engineers see the same handful of faults again and again. Knowing what causes them helps you spot trouble early and, in many cases, stop it happening at all.

Here are the seven issues we come across most often in cafés, pubs, hotels and offices.

1. The Machine is Not Heating Properly

If your espresso comes out lukewarm or the boiler takes an age to reach temperature, the heating element is the usual suspect. Elements burn out over time, especially when limescale coats them and forces them to work harder. A faulty pressurestat or thermostat can also give false readings, so the machine thinks it is hot enough when it is not.

2. Low Pump Pressure

A good espresso needs around 9 bars of pressure at the group head. When the gauge drops below this, shots run thin and lack crema. Worn pump vanes, a failing pump motor or a blocked inlet filter are common causes. Low mains water pressure can also be to blame.

3. Water Leaking from the Machine

Puddles under the counter tend to come from worn group head gaskets, perished hoses or loose fittings. Gaskets harden with heat and daily use, letting water escape around the portafilter. Leaks from the base of the machine can point to a split pipe or a faulty overpressure valve, both of which need an engineer.

4. Weak or Spitting Steam Wand

Milk takes longer to texture, or the wand splutters water instead of dry steam. Dried milk inside the steam tip is the most frequent cause, closely followed by scale in the steam valve. If steam boiler pressure is low, the problem may sit further back with the element or pressurestat.

5. Slow or No Flow Through the Group Head

When water dribbles out or stops completely, the shower screen and dispersion block are often clogged with coffee oils and fine grounds. In hard water areas, scale can block the internal pipework or the gicleur, the tiny restrictor that controls flow into the group. A sticking solenoid valve produces similar symptoms.

6. Boiler Overfilling or Not Filling

Most commercial machines refill the boiler automatically using a level probe. Scale on the probe confuses the sensor, so the boiler either keeps filling and pushes water out through the steam wand, or refuses to fill and triggers an error light. A faulty autofill solenoid or flowmeter can cause the same fault.

7. Coffee Tastes Bitter, Sour or Flat

Not every problem is mechanical. Bitter coffee usually means over-extraction from a grind that is too fine or a dirty group head. Sour shots point to under-extraction, often from a coarse grind or water that is not hot enough. Flat, dull flavour can come from stale beans, worn grinder burrs or untreated water.

The Common Thread: Water and Maintenance

Limescale and old coffee residue crop up again and again in this list. Most of the breakdowns we attend could have been avoided with daily backflushing, regular cleaning of the steam wand and an up-to-date water filter. Scale builds slowly, so a machine can seem fine for months before it suddenly fails.

That is why we recommend an annual service alongside a scheduled water filter change. Many of our customers book their PSSR certification at the same visit, as every commercial machine with a pressurised boiler must be certified as safe. One planned visit keeps costs predictable and cuts the risk of a mid-shift breakdown.

Need a Hand With Your Machine?

Our engineers have worked on all the major espresso and bean-to-cup brands, from La Spaziale and Conti to Jura, Gaggia and Rancilio. We fix 98% of faults on the first visit, and if your machine needs to come back to our workshop, we can supply a loan machine so you can keep serving. Find out more about our commercial coffee machine repair service, or call our team on 01322 381380 to book a repair or service.


< BACK TO BLOG

Review us